Find your filter.

FIRSTAIR^® FA560G-10 Ceiling Diffusion Media

Progressive-density polyester ceiling diffusion media for downdraft paint spray booths. Available in rolls and cut pads sized to your booth’s ceiling frames.

Model: FA560G-10

Fiberglass Paint Arrestor — 15G / 18G / 22G

Fiberglass paint-arrestor rolls and pads in three grades: 15G green/white, 18G blue/white and 22G yellow/white, for compatible paint-booth overspray capture.

Paint Booth Intake Panel Filters

Framed panels for the intake stage of compatible finishing and ventilation systems.

Paint Booth Pocket Exhaust Filters

Extended-surface pocket and bag filters designed for secondary exhaust filtration in compatible paint booth systems. The pocket construction provides increased media area and holding capacity while helping capture remaining overspray and particulate before exhaust air continues through the system.

Synthetic Fiber Pocket Filters

Multi-pocket filters place a large media area behind a compact header for commercial and industrial air handling.

Nonwoven Pocket Filters

Flexible multi-pocket media for staged filtration in compatible air-handling systems.

Fiberglass Pocket Filters

Fiberglass pocket media provides an alternative construction for commercial and industrial filter banks.

FIRSTAIR^® FA-MV 95S-F8 V-Bank Mini-Pleat Filter

High-efficiency synthetic V-bank mini-pleat filtration for commercial HVAC and industrial air-handling systems.

Model: FA-MV 95S-F8

Mini-Pleat Filter

Compact mini-pleat panels shown in black-frame configurations with and without a projecting header. Match the frame profile, dimensions and required filtration grade to your housing.

Mini-Pleat HEPA Filters

Final filtration for applications requiring a specified high-efficiency filter assembly and an appropriate sealing arrangement.

Activated Carbon Panel Filters

Carbon-media panels for application-specific odor and gas-phase filtration assessment. Selection depends on the contaminants and operating conditions.

High-Temperature Panel Filters

Filter panels for compatible heated-air processes. Specify continuous and peak temperatures when requesting a configuration.

Washable Mesh Filters

Mesh-format filters for compatible ventilation and equipment prefiltration applications.

Custom Cut Filter Pads

Filter pads sized around your application, media requirement and installation dimensions.

Custom Filter Sizes & OEM Requirements

Support for non-standard filter sizes and equipment replacement requirements. Share actual dimensions and the operating specification.

Paint Pocket Overspray Media

A three-dimensional pocket surface provides additional collection area for compatible spray-finishing exhaust systems.

Framed Fiberglass Paint Arrestor

Glass-fiber overspray media held in a supported panel for compatible exhaust filter racks.

Kraft Paper Paint Collector

A box-format overspray collector that directs the air through an internal paper collection structure.

Layered Paper Paint Separator

A box-format overspray collector that directs the air through an internal paper collection structure.

Extended-Surface Paint Exhaust Pockets

Green and white exhaust pockets with a supported perimeter and divided construction. Compare the two views with your existing filter and mounting arrangement.

Synthetic Intake Panels

Flat synthetic panels for incoming-air prefiltration in compatible finishing equipment.

Coarse Synthetic Intake Rolls

Progressive-density synthetic media for general ventilation and incoming-air prefiltration.

Activated Carbon Media Rolls

Carbon carried on a fiber matrix for application-specific gas-phase filtration assessment.

Activated Carbon Pocket Filters

Carbon-media pockets for installations that require an extended surface and application-specific gas-phase media selection.

Rigid Pleated Prefilters

A framed, self-supporting pleated panel for compatible prefilter housings.

Separator HEPA Box Filters

A deep pleated pack with separators for final filtration in compatible high-efficiency housings.

Knife-Edge Mini-Pleat HEPA

A mini-pleat filter with a knife-edge frame for housings designed around this sealing geometry.

U15 Knife-Edge Mini-Pleat Filters

A documented U15 configuration for critical-air installations requiring this class and a compatible knife-edge housing.

Gel-Seal HEPA Filters

A gel-channel sealing arrangement for terminal housings designed to accept this filter geometry.

FIRSTAIR^® RFL-F5 Rigid Pocket Filter

Self-supporting rigid synthetic pocket filter with a polypropylene header and 6 welded pockets in the documented full-size 1/1 configuration.

Model: RFL-F5

FIRSTAIR^® RTL-F6 Rigid Pocket Filter

Self-supporting rigid synthetic pocket filter with a polypropylene header and 8 welded pockets in the documented full-size 1/1 configuration.

Model: RTL-F6

White Pocket Filters

White pocket media mounted in a rectangular frame. Front, side and close-up views show the pocket arrangement and frame attachment for replacement identification.

Exhaust Bag Filters

Green and white exhaust bags shown in a vertical installed arrangement. Match the bag dimensions and attachment details to your equipment before selecting a replacement.