Fiberglass Paint Arrestor — 15G green/white, 18G blue/white and 22G yellow/white.
FIRSTAIR model: Confirm with your quotation
Fiberglass paint-arrestor rolls and pads in three grades: 15G green/white, 18G blue/white and 22G yellow/white, for compatible paint-booth overspray capture.
Fiberglass paint-arrestor rolls and pads in three grades: 15G green/white, 18G blue/white and 22G yellow/white, for compatible paint-booth overspray capture.
Install with the white side facing incoming air. Select the media weight, roll width and length for the booth and coating process. Grade-specific sheet values are not interchangeable with the separate FirstAir 22GY laboratory report.
The yellow/white grade is also identified as FirstAir 22GY. Its laboratory results below apply only to the documented 20 × 20 inch sample, paint and test conditions.
Continuous glass fiber with graduated density
2.5 in
White
| Specification | Available configuration |
|---|---|
| Construction | Graduated-density continuous glass fiber |
| Nominal loft | 2.5 in |
| 15 g/ft² grade | Green/white |
| 18 g/ft² grade | Blue/white |
| 22 g/ft² grade | Yellow/white |
| Air-entry side | White |
| Maximum operating temperature | 500 °F |
| Maximum operating humidity | 100% RH |
| Recommended final resistance | 0.5 in. w.g. |
| Height and width tolerance | ±1/4 in |
| Standard roll lengths | 100 ft and 300 ft; confirm selected size availability |
| Listed roll widths | 20, 25, 28, 30, 32, 36, 40, 41, 42, 45, 48, 60, 84 and 96 in (300-ft configurations) |
| 15 g/ft² sheet performance | 98.66% efficiency; 0.022 in. w.g. resistance; 718 g holding capacity |
| 18 g/ft² sheet performance | 98.96% efficiency; 0.031 in. w.g. resistance; 601 g holding capacity |
| 22 g/ft² sheet performance | 99.51% efficiency; 0.035 in. w.g. resistance; 831 g holding capacity |
| Performance scope | Product-sheet values. Test method, coating, sample area and airflow are not specified in that sheet; these are not universal guarantees or directly comparable with the separate FirstAir 22GY test. |
| Pad options | 15 and 22 g/ft²: 20 × 20, 20 × 25 or 24 × 24 in; 2.5 in nominal loft; no tackifier; 50 per case. Confirm availability. |
| FirstAir 22GY test — Model | FirstAir 22GY |
| FirstAir 22GY test — Media | Yellow-on-white high-loft fiberglass |
| FirstAir 22GY test — Test sample | 20 × 20 in pad |
| FirstAir 22GY test — Test report | R102T202, 9 May 2016 |
| FirstAir 22GY test — Test paint | High-Solids Permaclad, SW H67RC65 Permaclad 2400 |
| FirstAir 22GY test — Test air velocity | 150 fpm |
| FirstAir 22GY test — Spray conditions | Conventional air gun at 40 psi; paint feed 142 g/min (135 cc/min) |
| FirstAir 22GY test — Initial pressure drop | 0.03 in. w.g. |
| FirstAir 22GY test — Loaded final pressure drop | 0.50 in. w.g. |
| FirstAir 22GY test — Average removal in this test | 99.55% |
| FirstAir 22GY test — Paint retained by test filter | 1,794 g (4.0 lb as reported) |
| FirstAir 22GY test — Result scope | These are results for this sample and test conditions, not a universal efficiency or compliance certification. |
| Custom sizes | Request a quote with actual dimensions and quantity. |
Values apply only to the documented configurations. No certification or regulatory compliance is implied for unverified configurations.
Contact Specialty Filter for available dimensions. Include actual width, height and depth, preferred media, efficiency and quantity in your request.
Matching dimensions alone do not establish equivalent performance. Include the current filter label or specification.
Request the current technical data sheet, brochure or installation guidance for your selected configuration from our team.
Progressive-density polyester ceiling diffusion media for downdraft paint spray booths. Available in rolls and cut pads sized to your booth’s ceiling frames.
Model: FA560G-10
View Product ↗
Framed panels for the intake stage of compatible finishing and ventilation systems.
View Product ↗
Extended-surface pocket and bag filters designed for secondary exhaust filtration in compatible paint booth systems. The pocket construction provides increased media area and holding capacity while helping capture remaining overspray and particulate before exhaust air continues through the system.
View Product ↗Tell us your size, application or part number. We’ll help with the next step.
